Home
Gallery
NummerAuflagen
11Spring set can only be used in combination with shortened shock absorbers !
12Not for vehicle with self leveling control, or only if the self leveling control can be adjusted accordingly.
12Not for vehicle with self leveling control, or only if the self leveling control can be adjusted accordingly.
13Not for vehicles with EDC-system (electronic damper control)
13Not for vehicles with EDC-system (electronic damper control)
14The vehicle leveling control at the rear axle needs to be adjusted after lowering.
15Including vehicles with self leveling control.
16The lowering will be reduced by the rate of the factory lowering at vehicles with factory lowering.
17The side indicators need to be displaced / changed. They can be ordered from an authorized dealer with Alfa-Romeo order-no. 46 226 698. Please see manufacturer specifications for prices.
18Not for vehicles with air suspension.
19Only front axle springs included in delivery content. Rear height adjustment at the standard torsion bar.
20Not for vehicles with automatic transmission.
21Only/also for vehicles with air conditioning and/or automatic transmission.
22The mentioned lowering rate is the effective lowering. The factory lowering is already considered.
23Only/also for vehicles with automatic transmission.
24Not for vehicles with Esprit-, Avantgarde- or Sport suspension equipment.
25Discontinued product, available while supply lasts.
26A separate fixing point for the ABS-cable needs to be created at vehicles with ABS.
27Distance between the lower mounting holes of the front dampers should be 54 mm. Needs to be measured at the vehicle.
28Not for vehicles with gas-fuelled operating engines.
29Only rear springs are included in delivery. Front height adjustment at the standard torsion bar.
30We recommend to shorten the originial suspension limiter to 45 mm.
31There are only 2 front-axle springs included in delivery.
32We recommend to shorten the suspension limiter to 30 mm.
33Not for vehicles with OEM sport suspension.
34The lowering range has to be checked according to the requirements in the TÜV-certificate. The vehicles are factory-equipped with different spring rubber seats. The maximum lowering can by achieved by using 1-point spring rubber seats. The lowering range can be varied accordingly by using 3-point or 5-point rubbers (the rubbers are only available in OE). Please see manufacturer specifications for prices.
35For a lowering from 45 mm and more, a modification by using a swaybar conversion set Art. ZB50-008, Price 95,- € might be necessary to improve wheel clearance between stabilizer and drive shaft.
36An adaption of the spring seat (flanging) may be necessary.
37For vehicles with series sports suspensions please use our complete suspensions kit only
38Make sure the anti roll bar and the steering arms are at least 5 mm clear of the chassis. If not the chassis should be modified as necessary.
39Excluding turbo charged petrol engines
40At the rear axle of these cars, the car ride level has to be adjusted newly, after the lowering
41Excluding V-Tec models
71Front and rear axle with threaded height adjustment.
72Front axle threaded adjustment, rear adjustment at the standard torsion bar.
73Front axle threaded adjustment, rear fixed lowering.
74Not for 4WD vehicles (Quattro, 4x4, 4Motion,…).
77The side indicators need to be replaced / changed. They can be ordered at an authorized dealer with order-no. 46 226 698. hey can be ordered from an authorized dealer with Alfa-Romeo order-no. 46 226 698. Please see manufacturer specifications for prices.
78Wheel spacers might be necessary if original wheels/tires are used.
79Only for vehicles with a clamp diamter of 55 mm at the front axle.
80Only for vehicles with a clamp diamter of 50 mm at the front axle.
81Rear shock absorber with eye mounting.
82Rear shock absorber with fork mounting.
83Not for vehicles after 2004 with original 16" wheels.
84Distance between the lower mounting drill hole 72 mm (needs to be measured at the vehicle).
85Dimension between the mounting brackets 27 mm (needs to be measured at the vehicle).
86Dimension between the mounting brackets 23 mm (needs to be measured at the vehicle).
87Only for 4WD vehicles (Quattro, 4x4, 4Motion,…).
88Lower adjustment screw at the rear shock absorber 10 mm.
89Lower adjustment screw at the rear shock absorber 14 mm.
90For a lowering of more than 40 mm a convertion of the anti-sway bar is necessary. Vehicles without Xenon-headlights: order-no. ZB50-000, 155,- €; vehicles with Xenon-headlights: order-no. ZB50-005, 175,- €.
91For models older then 06/1992, modified topmounts need to be used. (BMW part no.: collar 31 336 764 947; disk 31 331 116 983; nut 31 331 110 196). Please see manufacturer specifications for prices.
92On the front axle struts you need to measure the whole distance of the lower mounting drills. This distance has to be 58mm.
93Additional front axle parts for vehicles with EDC are required from the manufacturer: BMW Part No.: dome bearings 31 331 091 709 + disc 31 331 116 983 + collar 31 331 110 196, for the rear: BMW order-no. dome bearing 33 521 091 710 + 33 521 090 282 + disc 33 521 092 986 + dust cover 31 331 137 932 + bump stop 33 531 091 031. Please see manufacturer specifications for prices.
94Only for vehicles with a strut diamter of 45 mm at the front axle.
95Only for vehicles with a strut diamter of 51 mm at the front axle.
96
97
101On the rear axle the factory air spring will maintain, the sport shock absorbers will be supplied.
102The indicator lights and day headlight beyond STVZO have to be modified at maximum lowering.
103Rear dampers not adjustable.
104Rear dampers not adjustable.
105Electronic damping control systems at vehicles have to be deactivated